8.10. UPHOLSTERY

Just like the ready-made upholstery for side panels, you can also order ready-made bench upholstery at Burton Car Company. It is available in 50 colours of imitation leather. Using two colours per bench is also possible.

- You have already attached the mats with (new) rubbers as described in 7.1.
- Bend the iron wires so they cannot cut through the upholstery.
- Pull the upper part of the upholstery over the reclining seat of the frame.
- Make sure the upholstery looks neat in the corners.
- Pull everything tight and knot the ropes to the back bar of the frame.
- Pull the upholstery for the seating over the frame and attach it to the sides by bringing the original bars through the fringed part of the imitation leather.
- Attach the bars into the notches of the frame. [picture]
- Use the (10) original upholstery clips for extra attachment of the upholstery to the frame to keep everything in position.
- To attach the clips, start in the middle.
- Again, pull everything tight and knot the ropes to the back bar of the frame.

RELATED PARTS

>>Upholstry package

>>Upholstery glue (1 liter)

>>Upholstryclamp original