|
The standard wiring harness supports four warning lights:
Oil pressure warning light (red)
>87 Oil pressure contact
>151 to +12V from the ignition
Brake fluid level warning light (red)
>540 Brake fluid level switch
>301 Constant +12v
Trafficator (green)
>310 Earth
>2 Flasher unit
Main beam warning light (blue or orange)
>310 Earth
>56a Main beam
When using the warning lights as present in the Burton speedometer, you should combine the oil pressure- and brake fluid level warning lights. Connect one side of the warning light to >151 and the other side to both >87 as well as >540. This will generate an active red warning light, if either the oil pressure or the brake fluid level or both are too low. |
Nederlands
English
Deutsch
Français
