5.11. REAR LIGHTS

All four lamps can easily be fitted in the pre-drilled holes. The rear lamps fit in the upper holes, the flasher lamps in the lower ones. This is a legal requirement; you are not allowed to reverse the lamp positions.
The rear lights are to be equipped with a 5/12 watts double contact bulb. The flasher lamps need a 21 watts single contact bulb.

ATTENTION! All four-bulb holders are equipped with only one ground connection under one of the two M5 fitting bolts. Make sure when fitting the wiring harness, that you connect the ground wire to the right wire thread.

RELATED PARTS

>>Rear light , AK400/350/250, DS break Burton

>>Indicator light rear Burton left or right

>>Reflector Lucas

>>Lighting set

>>Reflector TÜV