5. MOUNTING THE BODY

5.1. Transport and storage

5.2. Properties of polyester

5.3. Working with polyester

5.4. Cleaning and polishing

5.5. Mounting the rear mudguards

5.6. Gluing the gaiter for the steering column in place

5.7. Pedals

5.8. The short legs kit

5.9. Heater connection

5.10. Vehicle Identification Plate from the donor car

5.11. Rear lights

5.12. Wiring harness

5.13. Battery tray and horn

5.14. Bootlid

5.15. Bootlid stand

5.16. The Bootlid lock and numberplate light

<<Back

Print | Print (incl. sub-chapters)

5.10. VEHICLE IDENTIFICATION PLATE FROM THE DONOR CAR

The moment has come to install the Vehicle Identification Plate, which you have saved from your donor car.
Be sure to leave some room for the Burton ID plate, which the Burton Car Company can supply you on request once your car is officially road legal.

Drill two 4.5 millimetres holes using the Vehicle Identification Plate as a template.
Fit the plate, preferably using pop rivets.

identification plate

Website by InterXL